Kawasaki KEEL X-10 Racket Overgrip Blue

The grip is the only part of your equipment that touches your hand. When it fails, neither the best string bed nor the most expensive frame will save you — the racket twists in your hold and the shot goes somewhere other than intended. 🏸

The Kawasaki KEEL X-10 addresses this on three levels at once:

Tacky surface — a high-friction material that holds the hand even with a relaxed grip.

Embossed geometric texture — a precision pattern pressed into the surface increases friction and gives the fingers an extra point of purchase.

3D keel along the grip — a raised edge that guides the fingers, making it easier to find the right hold without looking at the racket.

The result: a secure hold through the swing, the smash and the follow-through — precisely when the force travelling from arm to racket is at its highest.

🛡️ A keel that absorbs shock

The 3D keel the model is named after — keel, as in the ridge running along a boat's hull — serves one further purpose. The manufacturer designed it as a cushioning layer that absorbs and disperses the shock travelling from the frame into the hand.

On a single shot it's imperceptible. After two hours and several hundred strokes it isn't: the wrist and forearm register every impact, especially at high string tension, which transmits shock more sharply. The raised keel structure softens that sting in the palm.

💧 Micro-pores that take sweat off the palm

The high-elasticity polyurethane has a micro-porous structure. Fine pores form air channels that absorb and drain sweat from the surface, rather than letting it collect between palm and grip.

That's a difference you notice not at the start of a match but in the third game. As the hand begins to sweat, an ordinary grip turns slippery — a micro-porous one moves the moisture away and keeps its tack, so your swing stays stable and your control unchanged.

The material is also abrasion-resistant, holding its texture and tack longer than cheaper grips that wear smooth after a handful of sessions.

🎾 Not just for badminton

The KEEL X-10 is a universal grip, suited to badminton, tennis and squash rackets, padel rackets and pickleball paddles. If you play more than one discipline, you don't need a separate grip for each racket.

👥 Who is this grip for?

👉 Players whose racket twists in the hand 🖐️ — the triple anti-slip system answers exactly that problem

👉 Anyone with heavily sweating palms 💧 — the micro-porous structure drains moisture rather than holding it

👉 Players training several times a week — abrasion-resistant material outlasts budget grips

👉 Anyone wanting to build up a slim handle ✋ — an overgrip is the simplest way to adjust grip thickness

👉 Multi-sport racket players 🎾 — one grip for badminton, tennis, squash, padel and pickleball

📋 Key features

• Type: overgrip
• Model: KEEL X-10
• Colour: blue
• Material: high-elasticity polyurethane, micro-porous structure
• 3D keel: shock-absorbing cushion layer
• Anti-slip system: tacky surface + embossed texture + 3D keel
• Properties: sweat wicking, vibration damping, abrasion resistance
• Pack size: 1 piece
• Use: badminton, tennis, squash, padel, pickleball

❓ Frequently Asked Questions – Kawasaki KEEL X-10

🔄 How does an overgrip differ from a base grip?
A base grip is the one wrapped onto the handle at the factory — thicker, bonded along its whole length, replaced rarely. An overgrip like the KEEL X-10 is thin and goes on top of the base grip. You replace it regularly as it loses tack, without touching the factory layer underneath.

🛡️ What is the 3D keel?
It's a raised structure running along the tape, forming perceptible ridges on the handle once wrapped. The model takes its name from it — a keel being the ridge along a boat's hull. It serves two purposes: it guides the fingers as you set your grip, and it absorbs some of the shock travelling from the frame into the hand.

✋ How much will it thicken the handle?
An overgrip increases handle circumference by roughly one grip size — turning a G6 into approximately a G5. Two layers increase it accordingly. If your racket has a slim handle you'd like to build up, this is the simplest and cheapest solution.

🔧 How often should I replace it?
It depends on how much you play and how heavily your hands sweat. Playing 2–3 times a week, replacement every 3–5 weeks is typical. The signal is simple: once the surface stops feeling tacky and starts to slip, it's time for a new one.

🎨 Which colours is the KEEL X-10 available in?
The range covers five colours: blue, pink, black, white and yellow. Material, construction and every property are identical across all versions — only the colour differs.

🎾 Does it fit a tennis racket?
Yes. The KEEL X-10 suits tennis, badminton and squash rackets, padel rackets and pickleball paddles. Handle thickness varies between these disciplines, but an overgrip is wound spirally, so the tape length covers all of them.

🌀 How do I wrap it correctly?
Start at the bottom of the handle, at the butt end. Peel off the protective film, stick down the narrow starting tab, then wind spirally upward, overlapping each turn by about a third of the previous one's width. Keep the tape lightly tensioned without stretching it hard. At the top, cut the excess at an angle and secure it with the finishing tape supplied.

💧 Will it cope with heavily sweating hands?
Yes — that's its strength. The micro-porous structure absorbs and drains sweat rather than letting it pool on the surface. If your previous grips turned slippery twenty minutes into a session, this should perform better.

📦 How many do I get?
The grip is sold individually — order exactly as many as you need. If you play regularly it's worth taking several at once: replacing every few weeks is a normal cycle, and ordering together saves on shipping.

🧼 Can the grip be washed?
No. Overgrips are consumables — instead of washing, you simply replace them. You can wipe one with a dry cloth to remove dust, but soaking it will destroy the adhesive layer and the micro-porous structure.

📊 Specification